The Morley VandalProx™ range is a tough and rugged proximity door reader specifically designed for external reader requirements.
VandalProx™ has a single piece stainless steel enclosure with a brass housing and painted finish options. All the electronics are fully potted and enclosed for total vandal resistance and complete resistance to the elements.
VandalProx™ readers have nonstandard screw fixings to ensure complete security.
VandalProx™ offers a read range and response performance, which exceeds all others in the vandal reader marketplace. Furthermore, this tough reader is priced to fit the tightest of budgets, without compromising user response or reliability.
The new VandalProx™ reader is available in Morley and HID standard 26-bit Wiegand output form for general use by any controller accepting HID readers. This means that VandalProx™ can be used as an external reader, with standard ABS readers for internal applications, on the same system.
VandalProx™ has all of the features and performance expected of the HID range, including the ability to be used in existing HID reader applications.
What’s more, VandalProx™ reads existing HID tokens and is perfect for system upgrades and refurbishments. Furthermore, VandalProx™ reader housings can be provided in stainless steel, Brass, Chrome and White painted steel.
The VandalProx™ reader range offers high reliability, consistently better read range characteristics, and low power consumption in a single, easy-to-install package. Standard features include a multicolored LED for visual operation as well as a sounder for audible confirmation of token acceptance, rejection and fault condition.
The VandalProx™ reader is designed for flat mounting directly onto an external surface such as brick, stone or metal.
VandalProx™ requires only a through hole for cable connection. Each reader is supplied with a 3M flying lead and vandal resistant screws. Once installed, a strong adhesive label covers the fixing points, for increased reader security and function identification.
 |
Mounting: VandalProx™ readers are designed to be unobtrusive and to mount directly to external surfaces. |
|
Visual
indication: When a proximity card is presented to the reader, the
red LED flashes green. Diagnostics: On reader power-up, an internal
self test routine checks and verifies the set-up configuration and
initialises the reader operation. An additional external loop-back
test allows for the reader outputs and inputs to be verified without
the use of additional test equipment. |
|
Indoor/outdoor
design: The VandalProx™ reader is encapsulated in a stainless
steel enclosure designed to withstand harsh environments as well as
provide complete vandal resistance. This allows reliable performance
in all arduous environments. |
|
Easily
interfaced: The VandalProx™ reader interfaces with all existing
HID Wiegand readers and tokens. This makes VandalProx™ the perfect
reader choice where external mounting is required. Why install an
ABS reader, which can be cracked, broken or just look tired and untidy
when you can have a stainless steel reader, which will not lose its
good looks and will resist the effects of poor weather and heavy use? |
| Typical read range (max): | ProxCard®
II card up to 4 cm ISOProx® II card up to 4 cm ProxKey™ II key fob up to 2.5 cm ProxCard® Plus card up to 4 cm |
| Dimensions: | 100 mm dia. x 18 mm deep |
| Material: | 304
Stainless Steel, Brass, Painted steel (white as standard, other colours
on request) |
| Power supply: | 4.75-16 Vdc, Linear power supply recommended. |
| Maximum current requirements: | Current
(DC) Average 35 mA Peak 60 mA |
| Operating temperature: | -22°F to 150°F (-30° to 65° C) |
| Operating humidity: | 0-95% relative humidity non-condensing |
| Weight: | Unpacked
(reader & cable) 350gm Packed weight 390g |
| Transmit frequency: | 125 kHz |
| Certifications: |
CE |
| Cable Lead: | 3m Flying lead, 6cores with overall screen |
| Cable distance: | 125M
feet, Recommended cable is ALPHA 1295 (22 AWG) 5 conductors stranded
with overall shield or equivalent. |
| Part Number | Description |
| 105047 | VandalProx™ Morley Outdoor HID technology Wiegand reader. Brass, Chrome and Painted finishes on request. |
