An attractive range of emergency door release units is available in green or in white colours. A protective plastic coating on the glass prevents operator injury and inhibits the release of glass fragments, enabling the unit to be operated by firm thumb pressure. A break glass hammer is not required.
The emergency door release break glass unit is tested by means of a test key (supplied with each unit) without the need to unfasten the cover. The surface mounted break glass unit is supplied with a plastic box, although flush mounting is available as an option upon request.
Clearly marked terminals are provided for connection and the break glass units are manufactured in green or white thermoplastic.
All units fully comply with CE requirements.
The
emergency door release units are one of a number of products available from
Morley Electronics Ltd for electronic access control and security access management
systems. If you have a need for such systems but cannot immediately see the
solution you require, contact Morley and we will have one of our customer
service engineers contact you to identify potential solutions.
| Operation: | Open Circuit Contacts |
| Contact rating: | 24V DC (resistive) |
| Dimensions: | 87 x 87 x 56.5 mm |
| Made from: | Green Thermoplastic |
| Weight: | 0.18 kg including plastic box |
 |
Flush mounting version |
|
Double pole relay output |
|
Spare break glasses |
|
Alternate coloured housings |
|
Weatherproof version |
The single pole changeover contacts of the switch are of fine silver and transfer when the glass is broken.
| Part Number | Description |
| 108031 | Green Emergency Break Glass Unit |
| 108032 | Red Emergency Break Glass Unit |
